Company   

Picture

We made it simple, we proved it worked.

The VARITAIN® PushIn is a pioneer in its class. It shows how the PushIn technology with LED alert turns any plug into a safe connection for the crew. It is a socket with a single spare part module which makes replacing it easy and hassle-free.

Easy and safe power supply for reefer containers:

Easy and safe power supply for reefer containers:

 

Push & go

Just push in. The integrated circuit breaker is automatically switched on after plug-in. No separate turn on and off is needed.

 

Safe

The PushIn technology ensures that voltage is only supplied after plug-in and automatically switched off after plug-out according to ISO 1496-2.

Picture

 

Quick & easy

VARITAIN® PushIn has one spare part module, which replaces the three previous single ones: Only one component, containing the MCCB circuit breaker, flange and socket insert, needs to be replaced.

 

Tough design

The VARITAIN® PushIn socket flange alongside the bayonet cap, show our smart use and long-standing experience of non-corrosive components in maritime applications.

Picture

 

Easy

LED reports the current status for quick check of function. 

 

 

High protection

With an IP66 / 67 approved protection level, every component of the socket is ready to resist tough environmental conditions.

Picture

 

Long life

The WISKA® VentPLUG pressure compensation unit ensures permanent pressure equalisation between the interior and the exterior and thus, minimises the risk of condensation water (optional).

 

Quality materials

To ensure efficient performance, every material that is used in our products is of high quality, tested and approved by relevant authorities.

Further benefits

  • No external moving components
  • High quality: Specially adjusted WISKA® circuit breaker
  • One circuit breaker per outlet featuring 10 - 100 kA short-circuit-breaking-capacity
  • Made in Germany
  • Economic maintenance costs due to extraordinary long service life
  • Patent proved
  • DNV GL approved
Picture

Use under extreme conditions

Small and Hot – this is how the new ShotGLAND cable gland series by WISKA presents itself. It has been designed especially for the industrial usage where extremely hot or very cold ambient temperatures prevail. Thanks to its minimal installation height, the ShotGLAND is one of the flattest cable glands on the market. Truly versatile!

In the LT-version the new ShotGLAND comes with an efficient silicone sealing that can be used in temperatures ranging from -60 °C to 180 °C. This makes ShotGLAND the ideal cable gland for high temperature environments like the steel industry or sensor technology as well as applications with lowest temperatures. Both version standard and LT are offered with an EMC insert. Using different sealing elements large range clamping sizes can be realized.  

The ShotGLAND cable gland is available in thread sizes from M 8 to M 63 thereby covering a broad application spectrum. By its compact sealing design the minimal installation height ranging from 10 mm (M 8) to 16,5 mm (M 63) is realized along with a protection class of IP 68 with strain relief.

Learn more about our ShotGLAND product range.

Your benefits with ShotGLAND

Your benefits with ShotGLAND

  • Use in extreme temperatures:
    With silicone sealing, the LT version of  the ShotGLAND can be used in temperatures ranging from -60 °C to 180 °C
  • Space-saving installation:
    Very flat design thanks to a compact sealing concept
  • Protection against electromagnetic disturbance:
    All cable glands are available with EMC inserts
  • Wide range of applications:
    Thread sizes from M 8 to M 63 and large clamping ranges thanks to various sealing inserts

With the development of the ShotGLAND, WISKA has again proved its long-standing competence for application specific cable glands. ShotGLAND is the ideal addition to the existing cable gland series by WISKA like the modular SPRINT system, the breathable venting products, the Hygienic Design series HatGLAND or the railway series.

Cable gland series for the railway industry in accordance with EN 45545

With the Railway Series, WISKA has developed an industry-specific expansion of its proven SPRINT cable gland system, thereby fully meeting the special needs of the rail industry.

Cable gland series for the railway industry in accordance with EN 45545

Since June 2013, products and their materials that are used in the railway sector must be tested in accordance with the new fire safety standard EN 45545, in order to meet the same quality standards across Europe. This does not only apply to new vehicles; the components used must also meet these requirements in remedial maintenance of railway vehicles. The RW product range complies with the required standards for European railway outfitters in all respects and for all materials used.

WISKA's RW series is the ideal combination of high-value product quality and multiple modularity, while maintaining compliance with standards. The RW components have been successfully tested for fire resistance in accordance with EN 45545-3:2013-08. Furthermore, the entire series meets the highest requirements of Hazard Level 3 that can be applied to the materials used in the railway industry.

WISKA is one of the first European manufacturers to have successfully tested a complete series of cable glands in the differing materials of polyamide, brass and stainless steel to meet both this standard and hazard level.

The SPRINT Railway (RW)-Serie by WISKA:

  • Modular cable gland system specifically for the railway industry
  • Meets fire protection standard EN 45545 and all requirements of Hazard Level 3 with fire resistance E30
  • Comprehensive range of multiple and special sealing inserts
  • Flex protection, external strain relief as well as venting and EMC products
  • PG, metric and NPT threads of different lengths
  • Fulfils all requirements of IP 68 and IP 69K

Our products of the Railway Series:

Picture

Maritime lighting for highest demands

With the LED multi-purpose luminaire 4000, WISKA has developed the perfect lighting solution for use in the maritime industry and the offshore sector. The innovative luminaire is DNV GL certified and, like all WISKA products, stands for the highest “made in Germany” quality.

Beyond excelling the high requirements of maritime lighting, the LED multi-purpose luminaire 4000 reduces maintenance costs to zero. The reason for that is simple: The luminaire dispenses of a driver, which considerably minimises the risk of failure.

With only reduced components and no additional lighting fixture housing, assembly and installation of the LED multi-purpose luminaire 4000 go straightforward. The lighting system has been tried and tested in thousands of operating hours and provides reliable working light regardless of even roughest conditions.

Your benefits with the LED multi-purpose luminaire 4000

LED multi-purpose luminaire 4000 at a glance

LED multi-purpose luminaire 4000 at a glance

  • Reduced components without any additional lighting fixture housing
  • Simple and fast mounting thanks to flexibly adjustable mounting rails and clamps
  • Breathable components to minimise risk of condensation water
  • Main connection is flexibly made using quick connectors, connection cable or junction boxes

Technical details of the LED multi-purpose luminaire 4000

  • Protection class: IP 66 / 67 / 68
  • Light colour: 5.600 K
  • Luminous flux: 2.000 lm (2x13 W) und 4.000 lm (2x26 W)
  • Voltage: 230 V and 110 V
  • Average lifetime of all components: 50.000 hours (L70 / B10)
  • Temperature range: -30 °C - 55 °C
  • Colour rendering index: > 80

Product variants

Depending on the application and lighting requirements, the LED multi-purpose luminaire 4000 is available with one or two tubes and with different assembly setups.

Our Highlights

Picture

Plug instead of wiring:
The plug-in solution for a quick installation

With the WHK, WISKA is combining its junction box expertise with the idea of power distribution via installation plug connectors.

The modular unit can be supplied pre-wired, using the sockets from most major manufacturers. Pre-fabricated components for building automation, e. g. lighting systems, make it possible to connect the power supply in seconds. Due to diverse mounting options, the new junction box is perfectly suited for flexible and mobile applications. This all makes the WHK the ideal junction box for electrical installations within commercial building.

Learn more about our WHK junction boxes.

Lid variety

WISKA offers lids with a wide range of connector combinations, tailor-made pre-installed. Alternatively,

you may also insert the preferred connectors into the plug-in locations independently.

Our Highlights

Our products

Picture Picture

WISKA is introducing a cable entry system especially designed for switchboard installations: CONMAXX. The innovative 3-component modular system offers customers a whole new dimension of flexibility.

The CONMAXX system consists of a closed frame, variable grid inserts and conical sealing elements.  The three components can be compiled individually according to requirement and application, as if in a modular system.

Even subsequent, individual changes to the wiring are no problem – without any laborious opening and closing. CONMAXX provides a better and easier solution to any installation requirement!

Your benefits with CONMAXX

Picture

Simply strong: BraceFITTING, BraceCONDUIT, BraceSLEEVE

The demands placed on cable protection products are justifiably high. Along with protection against external conditions such as the temperature, dirt and impact, handling must remain simple and convenient. A demand that our Brace® system meets. This page showcases our extensive range of products to help solve your cable protection needs.

Our Highlights

Picture

Multi talented and swift

Our new MultiCLIXX grommet offers fast cable installation with strain relief for up to four cables at the same time. MultiCLIXX combines all advantages of our QUIXX and CLIXX grommets: Simply push into the enclosure and insert the cable. No tool or locknut are needed – thanks to our well-proven two-component moulding.

Your benefits with MultiCLIXX

  • Fast installation: Push in, insert, done – for maximum time saving
  • Strain relief: According to EN 62444, Type A – for up to four cables at the same time
  • Space-saving: Its flat construction makes MultiCLIXX extremely space-saving and optically inconspicuous
  • High protection class: IP 66

Our MultiCLIXX

Minimal installation height from 10 mm (M8) to 16,5 mm (M63)

Minimal installation height from 10 mm (M8) to 16,5 mm (M63)

Different Grommets for large clamping ranges

Different Grommets for large clamping ranges

Available in a standard and LT-variety

Available in a standard and LT-variety

Thread sizes from M 8 to M 63

Thread sizes from M 8 to M 63

Suez Canal searchlight

Our new Suez Canal Searchlight fits seamlessly into the visual effect and reliability of the WISKA octagonal searchlights series. Its new generation stands for most easiest handling on board.

Small and rugged:

Small and rugged:

  • SKS 575 is only 20 % of the volume of its predecessor due to lamp change from halogen to metal halide
  • With a reduced weight of over 20 %, it ensures the most easiest handling on board
  • The double-sided powder-coated stainless steel housing guarantees absolute ruggedness: SKS 575 is highly protected against corrosion and seawater-resistant.
  • Certification: DNV GL / Suez Canal Authority, Certificate No. 75515-09HH

Suez Canal searchlight

One SKS for all ships

  • SKS 575 can be used on all vessels, regardless of the ship´s size (both below and above 30,000 GT)
  • When not being used it is additionally protected by a protective cover on the front pane

 High-quality illumination

  • Reduced power required from formerly 2,000W / 3,000W to only 575W
  • Increased lifetime of up to 1,000 hours from formerly 400 hours
  • Higher luminous efficiency of 85 lm/W
  • Light angles and spare lamp controlled via rotary levers

Our Suez Canal searchlight

Closed lid for installation without rectangular knockoutsv

Closed lid for installation without rectangular knockoutsv

WKH lid with eight rectangular knockouts for 3, 4 or 5 pole installation connectors from all regular manufacturers

WKH lid with eight rectangular knockouts for 3, 4 or 5 pole installation connectors from all regular manufacturers

Pre-wired lid, in this example with 3 pole and 4 pole installation connectors (more options available)

Pre-wired lid, in this example with 3 pole and 4 pole installation connectors (more options available)

The Brace® system protects against:

Mechanical movement

Mechanical movement

Vibration

Vibration

Water

Water

Electromagnetic radiation

Electromagnetic radiation

Heat and cold

Heat and cold

Acids, alkalis and sand

Acids, alkalis and sand

Non-metallic BraceFITTING: Things just clicked.

A new and unique product that many engineers have been waiting for: a sophisticated closure system and IP68 as standard are only two of the advantages that the installers love. You can find more reasons for the Brace® system right here at a glance.

Your benefits with our non-metallic BraceFITTING

  1. Surprisingly easy to use – thanks to the new hinged cover for lightning-fast opening and closing with one simple standard tool.
  2. Highest protection as standard – all variants of the non-metallic BraceFITTING with IP68 protection class.
  3. Tear-proof – thanks to a new closing system that directly grips in conduit.
  4. Twice the security – The directly injected O-ring seal ensures secure installation and perfect sealing properties.
  5. Time-saving maintenance – thanks to the external clearly visible O-ring seal.
  6. Cost-saving storage – A completely assembled product that keeps everything in one place saving on warehouse space, costs and time.

Our Searchlights

Single, connected via quick connectors

Single, connected via quick connectors

Double, connected via connection cable, pre-assembled

Double, connected via connection cable, pre-assembled

Double, connected to COMBI MAR junction box

Double, connected to COMBI MAR junction box

Single, connected via connection cable

Single, connected via connection cable

Our Highlights

Our products

Reefer container sockets & CEE: Our Highlights

Our products

COMBI: The junction box for all applications

WISKA COMBI junction boxes are easily identified by their well-known bellied cover allowing for more room inside the box and easy installation.

Click here for our COMBI products.

CONMAXX: Three components – endless product variants

About 100 different seals, four frame sizes and different grid inserts enable extremely flexible and individual electrical installation. Even solutions for special cables, sleeves, as well as pre-fabricated cables and wires are no problem with CONMAXX. The many possible combinations also reduce storage costs.

CONMAXX - Cable entry system and divided retrofit gland

Watch our video and see for yourself the advantages of our CONMAXX system!

Our products of the ShotGLAND serie

Our products of LED multi-purpose luminaire 4000

Our CCTV products

Cable glands according to British Standard BS 6121

Cable glands according to British Standard BS 6121


With its cable glands complying with British Standard (BS) 6121, WISKA offers products for installation. Due to the use of steel wire armour cables, these locations require the use of special versions of cable glands.

Unlike to German market, the UK and other Commonwealth markets use steel wire armoured cable, which requires the use of BW and CW cable glands. In addition to these cables there are types to suit SY or CY braided cable. The demands of these kind of cable glands are fixed in British Standard (BS) 6121.

Cable glands according to British Standard BS 6121

Eventually, due to several changes within the standards, and with the emergence of harmonised European Normative for products and equipment used in potentially flammable atmospheres, BS 6121 concentrated on the industrial cable gland design only, the essence of which has prevailed for more than 40 years.

Today the BS 6121 requirement, although still called for in many engineering specifications around the world, is slowly being lost and diluted in the process of harmonisation and globalisation. Whilst new EN standards may be brought into deal with generic subject headings, and are considered to replace existing national standards, they do not always address the issues and needs of all applications.
 

Our products of the British Standard series

Our product variants of the non-metallic BraceFITTING:

BraceFITTING non-metallic standard variant

BraceFITTING non-metallic standard variant

BraceFITTING non-metallic with cable gland

BraceFITTING non-metallic with cable gland

BraceFITTING with metal connection thread

BraceFITTING with metal connection thread

All products variants also available at 45° or 90° angles

All products variants also available at 45° or 90° angles

Mounting examples

The WHK junction box offers a high level of flexibility in use and mounting. A wide range of mounting options is available, for example onto cable trays, threaded rods and mounting plates, or using screw anchors, nails or click-installation.

HatGLAND: Hygienic Design & Manipulationssicherheit

Hygienic Design

HatGLAND fulfils all requirements and legal regulations concerning the cleaning of components in plant construction (Machinery Directive 2006/42/EG, DIN EN 1672-2-2005, EHEDG Documents 8 and 13) and, due to its construction, is ideally suited for applications in hygienic areas.

HatGLAND offers you:

HatGLAND offers you:

  • a 25 % slope design, allowing liquids to drain away quickly and easily,
  • no dirt collection as there are no recesses, grooves or raised areas,
  • gap-free sealing concept using hygiene-compliant material as well as IP 68 and 69K

You will benefit from higher security and quality of your installations and reduced cleaning and maintenance work.

Quick click-installation on the rear with the aid of various mounting materials

Quick click-installation on the rear with the aid of various mounting materials

Mounting with a centrally fixed mounting plate

Mounting with a centrally fixed mounting plate

Easy installation on walls or ceilings

Easy installation on walls or ceilings

1. CONMAXX Frame

1. CONMAXX Frame


The CONMAXX Frame is stable in shape and fits standardized industrial connector cutouts. Due to its closed construction there is no need for unscrewing to insert or change cables.

CONMAXX Frame is available in:

CF4:     70 x 81 mm
CF6:     70 x 106 mm
CF8:     70 x 126 mm
CF10:   70 x 153 mm

2. CONMAXX Grid

Different grid inserts can be pushed into the frame individually and thereby offer highest flexibility in cable entry. No matter if small or big cables – CONMAXX Grid make for an easy and fast installation and later adaption of cables.

Non-metallic BraceCONDUIT: A tough product gentle on the cable

Tamper proof

Due to its rugged construction, HatGLAND also as a tamper proof cable gland of polyamide, stainless steel or brass provides important protection for the cable entry.

It offers you:

It offers you:

  • Tamper proof: Opening the cable gland from the outside is impossible 
  • Secure clamping: The gap-free sealing concept and mounting from the inside provide IP 68 and IP 69K
  • Mounting and anti-twist protection: The cable gland is securely mounted thanks to locknut (stainless steel, brass) or quick-fix assembly clip (plastic version) inside the housing in a long slot
  • 2-component injection moulding technology for the plastic version


Ideal for: the food industry, medical and clean-room technologies, transport and rail technologies, the automotive industry, building surveillance systems

Our product of the HatGLAND-Series

Day signalling searchlight

Our new HML-ISO 35 offers you unbeatable advantages which not only facilitate operating and maintenance but also convince in handling and security at the same time.  

  • Light and ergonomic housing for comfortable operation
  • Adjustable hand straps for left-handed and right-handed persons
  • Operation with 12V or 24V DC - the searchlight electronically identifies the applied operation voltage 
  • Aming the target by means of an eye piece with integrated dioptre 
  • Practical front rocker switch with integrated micro-switch makes signalling very comfortable 
  • Integrated SOS function and battery-LED status display at the rear of the device
  • Optimal light signals: 35W halogen lamp with over 4,000 hours lifetime
  • Halogen lamp and glass mirror can be exchanged easily without any tools by detaching the quick release rubber seals 
  • Colour filters are mounted from the outside without opening the device
  • Due to its continuous light function, it can be used as a torch 
  • Protection agains condensation by a breathable cable gland VentGLAND, whose anti-kink spiral at the same time protects the cable against line breaks 

    
HML-ISO 35 is approved by Bundesamt für Seeschiffahrt und Hydrographie (BSH) according to SOLAS ISO 25861 (BSH/4615/4040977/09).

According to the marine equipment directive 2011/75/EU(A.1/4.52) with MED Authorizations No. BSH/4613/08901/2126/12 and Module B Certificate No. BSH/46122/4522125/12.

Our VARITAIN® PushIn

HatGLAND

Hygienic Design

HatGLAND fulfils all requirements and legal regulations concerning the cleaning of components in plant construction (Machinery Directive 2006/42/EG, DIN EN 1672-2-2005, EHEDG Documents 8 and 13) and, due to its construction, is ideally suited for applications in hygienic areas.

HatGLAND offers you:

HatGLAND offers you:

  • a 25 % slope design, allowing liquids to drain away quickly and easily,
  • no dirt collection as there are no recesses, grooves or raised areas,
  • gap-free sealing concept using hygiene-compliant material as well as IP 68 and 69K

You will benefit from higher security and quality of your installations and reduced cleaning and maintenance work.

CLIXX - The faster cable gland

CLIXX allows easy cable entry thanks to a membrane while also providing strain relief. CLIXX can be assembled in seconds: simply clip in the hole, insert cable and done.

Our products of the HatGLAND series

CGV: Single bar

CGV: Single bar

CGT: T-grid

CGT: T-grid

CGX: Cross grid

CGX: Cross grid

CGH: Double cross grid

CGH: Double cross grid

Our products of the WHK series

Picture

We take the pressure off

Being a pioneer in the development of breathable cable glands, WISKA today is an expert for breathable components avoiding condensation.

With the launch of the VentGLAND® in 2007, the world's first cable gland with pressure equalization, WISKA set new benchmarks. VentGLAND® cable glands and VentPLUG pressure equalization units are nowadays being used around the world, especially in sectors that are moisture and temperature sensitive such as shipping, and the lighting and solar industries.

Learn more about our Venting product range.

Your benefits with Venting products by WISKA

Your benefits with Venting products by WISKA

  • Effective pressure equalization
  • Protection against condensation
  • Protection against contaminants
  • High operational safety
  • Increased profitability
  • Wide product range
  • Ideal for roughest conditions
  • Highest product quality

Solutions for every application

The diversity of our products provide venting solutions for a broad range of applications. Thread sizes include M 12 to M 63 with a wide range of materials such as polyamide, brass and stainless steel. Completed by their high protection classes of IP 68 and 69, venting products by WISKA appear to be true multitalents. On top of that, they have application specific membranes with different air flow rates and robust properties such as resistance to UV, salt water and aggressive chemicals.

WISKA offers many years of experience and working with customers to provide solutions that meet any individual requirements. You may also use our venting calculator to compute the optimal application of our pressure equalization products.

Our VentGLAND® Cable glands

Our VentGLAND® Cable glands

The VentGLAND® combines pressure equalization and cable gland in a single unit and features high air flow rates as well as high water protection capacity.

The breathable VentGLAND® cable glands are a part of the tried and tested modular SPRINT system. The VentGLAND® can easily be used to replace standard cable glands due to its identical clamping ranges and compatibility with all cap nuts and ranges of multiple and special sealing inserts. The product portfolio is rounded off with VentGLAND® cable glands with EMC-inserts for protection against electromagnetic interference.

Our new VentPLUG Pressure equalization units

Our new VentPLUG Pressure equalization units

The VentPLUG is used when a cable gland with an additional pressure equalization unit is required to vent the enclosure.

Pressure equalization units from WISKA are now also available in thread sizes M 20 and M 40, in addition to M 12. Both feature a flat, space-saving design to enable flexible usage. Thanks to an improved membrane, the air flow rate of the new VentPLUG in the sizes M 20 and M 40 has more than doubled. The high air flow version even achieves a 2.5 times higher value.

Why Venting?

Why Venting?


Hermetically sealed enclosures are insufficient to protect electrical installations from moisture and contaminants. Fluctuating temperatures and environmental factors, especially during outdoor usage, create pressure inside tightly sealed enclosures. This leads to a build-up of condensation as well as damage to the seal that can result in the penetration of moisture and dirt.

Click here for more information.

Our products of the Venting series

Enlarge ...

Enlarge ...

Enlarge ...

Enlarge ...

3. CONMAXX Seal

No matter if you have a big or small cable diameter – CONMAXX offers the fitting sealing element for your needs. Thanks to its unique conically shaped design CONMAXX seals ensure the high protection class of IP 66.

Enlarge ...

Enlarge ...

Enlarge ...

Our Day Signalling Searchlight

Metallic BraceFITTING

Our metallic BraceFITTING simplifies installation and reliably protects cables. With the IP67 protection as standard, it meets the highest demands placed on the application. The various colour schemes of the O-ring seals tell the user which conduit is the right one at a glance

Your benefits with our metallic BraceFITTING

Your benefits with our metallic BraceFITTING

  1. The toughest under pressure – Tightly turning the cap nut presses the hose connection socket and instantly ensures the highest leak-free
    connection.
  2. Makes all the difference at first glance – Along with the highest material and processing quality, thanks to the two differently-coloured O-ring seals, installers see which application is
    correct for the products.
  3. High protection as standard – thanks to an IP67 protection class throughout the system.
  4. A tough performer – Versatile in use, the metallic system protects against tearing off, twisting and vibration.
  5. Everything from one source – We supply metallic BraceFITTING’s preassembled in one piece. That saves warehouse space and all the parts stay safely together until final assembly.

Your benefits by CLIXX:

  • CLIXX replaces your cable gland in standard installations
  • Same clamping and sealing ranges, high protection degree and Strain relief to EN 62444
  • 75 % assembly time savings compared to a cable gland: Only one single component to clip in – no tool, no locknut required
  • Thanks to its flat construction, CLIXX is particularly space-saving in tight installation spaces
     
Picture

CLIXX Assembly

  1. Clip in CLIXX with one action
  2. Insert cable, pull back, finished!

Time savings up to 75 %


Cable gland assembly

  1. Insert cable gland
  2. Fix locknut
  3. Insert cable
  4. Fix cap nut
The black sealing elements are especially designed to withstand high operational temperatures and have fire protection class UL 94 HB.

The black sealing elements are especially designed to withstand high operational temperatures and have fire protection class UL 94 HB.

Grey sealing elements offer the high fire class of UL 94 V0; making them suitable for the rail industry.

Grey sealing elements offer the high fire class of UL 94 V0; making them suitable for the rail industry.

By using multiple sealings you can insert two or more and also special cable types.

By using multiple sealings you can insert two or more and also special cable types.

Flex protection insert for an additional protection allowing higher cable flexibility.

Flex protection insert for an additional protection allowing higher cable flexibility.

Our products of the CONMAXX series

Metallic BraceCONDUIT: Takes the extreme out of extreme conditions

Our CLIXX products

Features of the COMBI series:

  • Weather-proof, resistant to ultraviolet, shatter proof, impact-resistant
  • Ideally suitable for extreme conditions or outdoor installations
  • Solid thermoplastic housing made out of 2 different kinds of moulding components 
  • Flame-retardent and halogen-free
  • saving on labour thanks to faster cable entry via soft self-sealing membrane, no further tool required (COMBI 108, 407, 607, 1210)
  • Self-sealing membrane in the ground enables clean assembly for cable outputs from the wall (COMBI 108, 407, 607, 1210)
  • Captive and rust-free quick-release lid screws of plastic, closing of the box with only a quarter turn
  • 10 % more room inside thanks to bellied cover
  • Integrated thread in which cable glands can be directly mounted into - without locknuts. The combination of thread and membrane saves you one further working process. (COMBI 308, 407, 607 und 1210)

Click on the red dots to see the advantages of the COMBI series

Quick and secure closing

Rust-free captive quick-release fasteners: close and seal the box with just a quarter turn

For extreme conditions, indoors and out

Strong thermoplastic housing made from two separate plastic component

Unique design

Ribbed corners and the unique WISKA bellied cover for 10 % more space inside

Protection against moisture and dust

High protection class of IP 66 / 67

Quick installation

Combined threaded and membrane entries for installation without tools or locknuts

BraceSLEEVE: Thinking outside the box.

Multiple cables, e.g. for securely installing a robotic arm, are a great challenge even for experienced workers. With our flexible and easy to use braided and woven sleeves, cables are protected against heat, mechanical dirt and fire – regardless of where they are installed.

Adaptor to connect COMBI 308 or COMBI 1210

Adaptor to connect COMBI 308 or COMBI 1210

No further tool required

No further tool required

 Earthing plate suitable for use with COMBI for SWA cable with BW / CW cable glands

Earthing plate suitable for use with COMBI for SWA cable with BW / CW cable glands

COMBI 108, 407 and 308 with fast mounting clip

COMBI 108, 407 and 308 with fast mounting clip

Our product variants of BraceSLEEVE

FP: Additional protection against wear

FP: Additional protection against wear

PEOS: Mechanical and thermal protection of electronic equipment and components

PEOS: Mechanical and thermal protection of electronic equipment and components

FGB-SC-2,5: Excellent insulation properties up to 2.5 kV

FGB-SC-2,5: Excellent insulation properties up to 2.5 kV

FGB-SC-7,5: Excellent insulation properties up to 7.5 kV

FGB-SC-7,5: Excellent insulation properties up to 7.5 kV

FGB-SCE: Impressive fire protection properties

FGB-SCE: Impressive fire protection properties

FGB-SVI: Protects even against temperatures up to 300 °C

FGB-SVI: Protects even against temperatures up to 300 °C

FGBOS-SC: Open sleeve with excellent fire protection properties.

FGBOS-SC: Open sleeve with excellent fire protection properties.

PSOS: Open sleeve resistant to electromagnetic radiation.

PSOS: Open sleeve resistant to electromagnetic radiation.

Flexibility is strong in this one!

Flexibility is strong in this one!

The newest family member completes the COMBI series – the clever solution for junction boxes.

Its external dimensions of 95 x 95 x 60 mm present an additional box size between the COMBI 308 and 607. With its innovative features, including the threaded membrane entries, it offers the full range of all COMBI benefits. New to the product line are also screwless push in terminals for quicker and easier installation. Furthermore all accessories of the COMBI 308 are also available for the 407.

The 6 x M 20 threaded membrane entries combined with the M 20 threaded and middle membrane entry with knockout to M 25 make for maximum flexibility.

The COMBI 407 is a valuable addition for our junction box family.

3-D CAD files can be found in the menue structure below the product picture of each specific model.

Our Brace products

COMBI IP 68 SET

COMBI IP 68 SET

Our COMBI junction boxes in the new IP 68 SET offer optimal protection against moisture by a new filling material. Your solution to damp surroundings! 

  • Available for COMBI 308, 407, 607 and 1010
  • The sealing technique ensures a high life expectancy, even under permanent influence of moisture, ideal for ports and shipyards, car wash plants, tunnels and flooding areas
  • IP 68 up to a water depth of up to 15 meters and 170 hours according to DIN EN 60529
  • Usable at temperatures between -30°C and 100°C
  • Mixing bag solution allows for a professional and clean sealing of the box as well as an easy removal of the filling material, plastic sprue allows for easy sealing 
  • Filling material consolidates after a few minute
  • Delivery includes: COMBI junction box, plastic bag with fluid, plastic sprue and stop end

Our products of the COMBI series

forgot password?

Imprint | T&C | Privacy Policy | Sitemap
Downloads | Press | Contact | login | Print page
Stand: 17.11.2017 20:11:00